Rki-instruments GX-2009 Bedienungsanleitung Seite 49
- Seite / 54
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Setting Commands • 49
Bump Test Limit Check
This item defines what indication is given during start up when
bump testing is due and Bump Test Limit Display is set to On.
With Bump Test Limit Check set to Confirm to use (factory
setting), the GX-2009 will give an indication at start up if bump
testing is due and require the user to press and release the
POWER MODE button to continue.
With Bump Test Limit Check set to Can’t use, if the unit is due
for bump testing the GX-2009 will give an indication at start up
that bump testing is due and the unit cannot be used until it is
bump tested. With this setting, it is necessary to bump test the
instrument before it can be used. You may bump test the
instrument using the BUMP menu item in Calibration Mode.
With Bump Test Limit Check set to None, no confirmation
during startup or bump testing is required to use the GX-2009 if
it is past due for bump testing.
Bump Test Time
Length of time gas is applied during a bump test. The factory
setting is 30 seconds.
Bump Test Threshold
Percentage that the gas reading may differ from actual gas
value to pass a bump test. The factory setting is 30%.
Cal. Time After Bump Fail Inc. Bump Time
Length of time gas is applied during calibration after a bump test
has failed if Calibration after Bump Test Failed is set to On.
The factory setting is 90 seconds. This time includes the time
that the unit was being bump tested. If Cal. Time After Bump
Fail Inc. Bump Time is set to 90 seconds and the Bump Test
Time is set to 30 seconds, the unit will sample gas for an
additional 60 seconds if the bump test fails to bring the total
exposure time to 90 seconds.
- GX-2009 User Setup Program 1
- Operator’s Manual 1
- Warranty 2
- Table of Contents 3
- Introduction 4
- System Requirements 5
- IrDA Downloading Cable 11
- Wireless Link Operation Note 12
- 6. Click OK 13
- Launching the Program 14
- Connecting a GX-2009 to 15
- TRANSMIT 17
- C--LIMIT 17
- B--LIMIT 18
- B--LIMIT 18
- Read Commands 19
- Instrument Information 20
- Read Commands • 21 21
- 22 • Read Commands 22
- Information Get & Save 23
- 24 • Read Commands 24
- Read Commands • 25 25
- Write Commands 26
- Date/Time Set 27
- Calibration 28
- Write Commands • 29 29
- 30 • Write Commands 30
- Write Commands • 31 31
- To Fixed Flow 32
- Regulator 32
- Calibration Tubing 32
- Adapter Plate 32
- 34 • Write Commands 34
- Write Commands • 35 35
- Setting Commands 36
- Load Local File 37
- 38 • Setting Commands 38
- Setting Commands • 39 39
- 40 • Setting Commands 40
- Store Local File 41
- 42 • Setting Commands 42
- Setting Commands • 43 43
- Detail Settings 44
- Setting Commands • 45 45
- 46 • Setting Commands 46
- Setting Commands • 47 47
- 48 • Setting Commands 48
- Setting Commands • 49 49
- 50 • Setting Commands 50
- Setting Commands • 51 51
- 52 • Setting Commands 52
- Spare Parts List 53
- 54 • Spare Parts List 54
- Table 1: Spare Parts List 54
- Part Number Description 54
PYLE Audio PLDVD48 manuals
Owner’s manuals and user’s guides for Car media receivers PYLE Audio PLDVD48.
We providing 1 pdf manuals PYLE Audio PLDVD48 for download free by document types: User Manual
Kommentare zu diesen Handbüchern